DEWPOINT & HUMIDITY

 

RO120 Precision Transmitter

The RO120 is a precision transmitter that provides quick and accurate humidity, barometric pressure, temperature, absolute pressure and dew point measurements in a wide range of applications. It has a wide temperature range of -40°C to 120°C and is resistant to most chemicals. This remote type transmitter comes standard with a 6 foot cable and is ideally suited for many different applications such as environmental chambers, compressed air, furnace and industrial applications. Roscid also offers a wall mount and duct mount configuration.

Specifications:

ACCURACY:
RH: ±1%
Temperature: ±0.5°C

OPERATING RANGE:
RH: 0-95% (non-condensing)

Temperature: -40°C to 120°C Wall-mount T-range 0C to +60C

Dew Point: -60°C to 95°C
Pressure rated: up to 700psia
Typical model (RO120-P: transducer to 200psi, the RO120-PS transducer reads up to 400psi

Barometric Pressure:

1100mB +/-5 mB

Model Type:Description:
RO120A temperature / dew point / RH transmitter with three 0-10V outputs and a RS232 programmable output
RO120-BA temperature / barometric pressure / RH transmitter or dew point with three 0-10v outputs and a programmable RS232 programmable output
RO120-PA temperature / Pressure (psia) / dew point transmitter with 6-foot cable, three 0-10v outputs and a RS232 programmable output
RO120-PSA temperature / Pressure (psia) / dew point transmitter with 6-foot cable, three 0-10v outputs and a RS232 programmable output, pressure transducer readings to 400psi
RO120-DISA temperature / dew point / RH transmitter with a 2-line LCD display, three 4-20mA outputs, 2 programmable alarm relays and a RS232 programmable output
RO120-B-DISA temperature / barometric pressure / RH transmitter or dew point with a 2-line LCD display, three 4-20mA outputs, 2 programmable alarm relays and a RS232 programmable output
RO120-P-DISA temperature / Pressure (psia) / dew point transmitter with a 2-line LCD display, three 4-20mA outputs, 2 programmable alarm relays and a RS232 programmable output, transducer reads up to 200psi
RO120-PS-DISA temperature / Pressure (psia) / dew point transmitter with a 2-line LCD display, three 4-20mA outputs, 2 programmable alarm relays and a RS232 programmable output transducer reads up to 400psi
RO120-W-DISA wall mount temperature / dew point / RH transmitter with a 2-line LCD display, three 4-20mA outputs, 2 programmable alarm relays and a RS232 programmable output
RO120-W-B-DISA wall mount temperature / barometric pressure/RH transmitter with a 2-line LCD display, three 4-20mA outputs, 2 programmable alarm relays and a RS232 programmable output
RO120-DA duct mount configuration with dew point/ temperature / RH transmitter with 6-foot cable, three 0-10v outputs and a RS232 programmable output
RO120-D-BA duct mount configuration with temperature / barometric Pressure / RH transmitter or dew point with 6-foot cable, three 0-10v outputs and a RS232 programmable output
RO120-D-DISA Duct mount temperature / dew point / RH transmitter with a 2-line LCD display, three 4-20mA outputs, 2 programmable alarm relays and a RS232 programmable output
RO120-D-B-DISA duct mount temperature / barometric pressure/RH transmitter or dew point with a 2-line LCD display, three 4-20mA outputs, 2 programmable alarm relays and a RS232 programmable output
RO120-SCRO120 Sample Chamber
RO120-ABFor RO120 probes only, an adapter board that the sensor plug into and the customer is allowed to hard wire to a terminal block

GENERAL:

Speed of Response: 12 Second response time that is T63, 0 to 90%

Storage temperature 150C

Cable length: 6 feet, for other lengths contact factory: (for remote and duct mount configurations only)

Probe length: 8in (20.3cm): (for remote and duct mount configurations only)

Probe Material: 316 stainless steel (for remote and duct mount configurations only)

Filter: Sintered filter top, removable (for remote and duct mount configurations only)

Sensor: Polymer-capacitive: for all configurations

Fitting: Adjustable ¾ NPT (for remote only)

Connections: Screw terminals Wire (20-24awg) standard wire required

RO120 Precision Transmitter
RO120 Precision Transmitter
RO120 Precision Transmitter

SPECIFICATIONS

ROSCID TECHNOLOGIES MANUFACTURES AND SELLS HIGH-LEVEL ANALYZING EQUIPMENT FOR THE GAS AND HUMIDITY MARKETS.

With over 35 years’ experience in the field, our knowledge and equipment allows customers to have the correct application for their process. We offer a wide variety of products that feature the ability to detect and measure levels of oxygen, carbon monoxide, and moisture with a high efficiency.